Set of 4 Motor Brackets for Bearon Aquatics PowerHouse Ice Eater Motor and Aerator Motor
L-Shaped Almag Brackets for Power House Ice Eater Oil-Filled Motors
Almag Brackets are 4x Stronger than PVC Motor Brackets, but NOT suitable for saltwater use. FRESH-WATER ONLY | DO NOT USE IN SALT-WATER.
L-Shaped Replacement PVC Brackets for Power House Oil-Filled Motors are suitable for ALL water types.
Ice Eater Brackets are available in 3 options:
- (4) – Almag Motor Brackets (Large Only)
- (4) – PVC Motor Brackets (Large or Small)
TOOLS NEEDED
(1) – 9/32″ Drill Bit and Drill
(2) – 7/16″ or Adjustable Wrench
HARDWARE NEEDED
Typically, original hardware can be reused. However, here is the hardware needed in the event they have been lost or are unusable.
(4) – 1/4 x 20 x 1 1/4″ Stainless Steel Bolts
(4) – 1/4 x 20 Stainless Steel Nuts
(8) – 1/4 x 20 Stainless Steel Flat Washers
Ice Eater Motor Bracket Size Guide
Almag Large Brackets – Part Number 20300
Dimensions: 3 3/4″ Long Leg (to shroud), 2 7/8″ Short Leg (to motor), 1″ Wide, 1/2″ Thick
Fits the Following
Ice Eater: P750 & P1000
Surface Aerator: F750DP & F1000DP
Aerating Fountain: F500F & F1000F
Flo-Gen: FG750 & FG1000
PVC Large Brackets – Part Number 20200
Dimensions: 3 3/4″ Long Leg (to shroud), 2 7/8″ Short Leg (to motor), 1″ Wide, 1/2″ Thick
Fits the Following
Ice Eater: P750 & P1000
Surface Aerator: F750DP & F1000DP
Aerating Fountain: F500F & F1000F
Flo-Gen: FG750 & FG1000
PVC Small Brackets – Part Number 20100
Dimensions: 3 5/8″ Long Leg (to shroud), 1 7/8″ Short Leg (to motor), 1″ Wide, 1/2″ Thick
Fits the Following
Ice Eater: P250 & P500
Surface Aerator: F250 & F500
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov