Matala Geyser Hi-Flow Water Pump

Matala Geyser Hi-Flow Water Pump

Whether you have a preformed or a liner pond, a pond pump is a paramount component of any water feature.

Submersible pond pumps can be placed directly in the pond and require relatively little installation. They are free of distracting noise, and for smaller ponds, can easily be utilized to drain your pond (if you hook up a hose to the output flow). These pumps are often used inside pond skimmer boxes where they are out of sight. In this application, they generally feed a waterfall-type filter as it flows back to the pond providing aeration and water circulation.

Submersible Pond Pumps are sized by gallons per hour (GPH) output. Read the flow chart for each pump to see the performance at various head pressures.

Flow rates range from 9,000 GPH to as high as 18,000 GPH. Generally, the ideal pump will circulate the total volume of a fish pond at least once per hour. For example, if you pond is 2000 gallons, you would want to go with at least a 2000 GPH pump.

The "Versiflow" Pump is unique in that it is horizontal low profile. It can be used in fountains or skimmer boxes. The Vertical style "Geyser-Flow" Pump is great for all kinds of applications in skimmer boxes or just dropping in the bottom of the pond or fountain to feed waterfalls or decorative features. The "Geyser Hi-Flow" is great for waterfalls and can pump up to 18,000 gph !!

Be sure to check the cord length when choosing a submersible pond pump to ensure that it will reach your electric outlet with a ground fault circuit interrupter (GFCI). Our pumps come with 19 ft cords.

The submersible pump may be pulled from the water occasionally to clean its pre-filter or screen.

The unobtrusiveness of submersible pond pumps allows them to be used in pond designs that incorporate more natural settings, as you do not have to hide or camouflage the pump. Submersible pond pumps also run quietly and will not disturb any outdoor activities.

Matala Geyser Hi-Flow Submersible Water Pump is available in 3 options:

• 1 Hp GHF-9000
• 1.5 Hp GHF-13000
• 2 Hp GHF-18000

Matala Geyser Hi-Flow Water Pump Specifications:

• Large Waterfall, fountain, and garden spraying.
• To irrigate or discharge water from farmland or ponds.
• For use to discharge rainwater.
• Sump pit, and washed water handling.
• 10mm hole size in the strainer
• 3-inch female outlet fitting.
• 2-year Limited Warranty
• 1 1/2 HP Vertical 3" Out 13000 gph 115V/60Hz

• Geyser Hi-Flow 9000 115 volts Dimensions: 19.3" Tall x 7.5" Wide x 11.7" Wide Outlet Volute.

• Geyser Hi-Flow 13,000 115 volts. Dimensions: 19.9" Tall x 7.5" Wide x 11.7" Wide Outlet Volute.
• Geyser Hi-Flow 18,000 230 Volts Dimensions: 22.3" Tall x 8.54 Wide x 12.56" Wide Outlet Volute.
• Please note. These are high-flow rate pumps and require adequate water depth with the unhampered flow to the pump. Water depth should be at least 26" deep at all times. The pump must be submerged at all times.
• Geyser HiFlow Pumps require a minimum of 15 feet of head pressure to avoid cavitation and amp overload.