Bearon Aquatics P250 Ice Eater - 1/4 Hp

The Bearon Aquatics P250 Ice Eater is a 1/4 Horsepower dock de-icer that will keep a 20 to 25-foot diameter circle of water open in freezing conditions.

• 1/4 Horsepower 
• 2.5 Running Amps (115v) / 1.25 (230v)
• 20 - 25ft Water Opening
• 28 lbs of Thrust
• Moves 900 gallons of water per minute
• 1650 RPM's
• Hertz: 50/60
• Shroud: 12 in W x 6 in H
• Cost/24hrs of Use: $0.97
  (Based at $0.14/kWh - avg 2023 cost in Missouri) 

How Does the P250 Ice Eater Melt Ice? 

The Bearon Aquatics P250 Ice Eater pulls warmer water up to the surface to keep a 20ft to 25ft diameter circle of water open in icy conditions. The P250 Ice Eater is most often used for small boats and docks as well as ponds.

Originally known as Powerhouse Ice Eaters, these reliable units have been trusted by customers to keep their docks and boats protected for over 40 years!

Each Ice Eater comes with 2 mooring ropes that make it very easy to setup and install. We can assist with any questions you have, but most of the time it is a very quick and easy task. Additional mounting options are available and you will find those below.

Other Bearon Aquatics Ice Eater Options:
 

Bearon Aquatics P500 Ice Eater
1/2 Horsepower

For Small Boats
& Dock Slips

Click to view P500 Ice Eater

Bearon Aquatics P750 Ice Eater
3/4 Horsepower

For Mid-Size Boats
& Multi-Slip Docks

Click to view P750 Ice Eater

Bearon Aquatics P1000 Ice Eater
1 Horsepower

For Large Boats, Large Docks,
& Marinas

Click to view P1000 Ice Eater

Most Popular Ice Eater Accessories:

Bearon Aquatics Ice Eater Timer
Set your Ice Eater to only run at certain hours of the day. This will keep energy costs down.

Click to View Timer

Bearon Aquatics Ice Eater Thermostat
Set your Ice Eater to only run when the temperature gets near freezing point. Keeps energy costs down.

Click to View Thermostat

Bearon Aquatics Ice Eater Screen Kit
Add a screen kit to protect your ice eater from chunks of ice and debris. Protects against damage.

Click to view Screen Kit

All Other Ice Eater Accessories

View all of our other Ice Eater accessories.

Click to view Accessories

Bearon Aquatics Powerhouse Ice Eater Dock De-Icer Features and Benefits

• Energy-Efficient: a 115 Volt or 230 Volt Bearon Aquatics - Powerhouse Ice Eater is more efficient than competitors and will keep your costs down.

• Heavy Grade Motor Housing: built with 16 gauge 304 stainless steel, bronze endbell, and 316 stainless steel motor shaft to operate corrosion-free in freshwater and saltwater.  This ensures that your PowerHouse Ice Eater will be keeping your property protected from ice damage for years.

• #1 in Water Movement: Bearon Aquatics Ice Eaters circulate more freshwater or saltwater.  1650 revolutions per minute (RPM) produce more Gallons Per Minute (GPM) of water flow than any other dock de-icer on the market.

• Permanent Split Capacitor: ensures quick, high torque, and smooth operation while performing at the same high efficiency as a single-phase induction motor.  The split capacitor is in sync with the motor for unmatched productivity.

• Environmentally Friendly: No Oil! The rotor is cooled by an environmentally friendly dielectric lubricating fluid and supported by two heavy-duty ball bearings.  Internal mechanical seal and stainless steel components and additional double lip shaft seal are in place for extra protection and also use the environmentally friendly fluid.  This ensures we get our desired result without harming the environment.

• Maximum Performance - Multiple Options: Venturi shroud features ends that flare outward to create greater upward thrust to pull warmer water from deeper areas. The unique housing also allows you to utilize the dock deicer in 5 different flow patterns.  This allows you to control areas that are protected and choose the optimal solution. The PowerHouse Ice Eater generates more freshwater and saltwater flow than any other dock de-icer.

• Double Checked, Certified, and Ready to Operate: All Bearon Aquatics Ice Eaters are performance tested and certified for appropriate output and leaks before they are shipped to you.

• Custom-Designed Propellor:  Maximizes results and features screws on the shaft for quick and easy replacement.  Great performance and easy to replace.

• Easy to Setup/Install:  Unlike some other dock de-icers, Bearon Aquatics Ice Eaters require almost no setup.  We will quickly ship your Ice Eater to you and all you will have to do is take it out of the box, secure the Ice Eater with the 2 included 25ft suspension ropes, place it in the water, plug it in, and sit back and watch the ice melt. Unlike some other models, no additional hardware is needed to get different ice eater patterns.

• Great for Waterfowl Hunting: When you add a Shallow Water Stand to an Ice Eater you can keep a pond from freezing and create a dream situation for duck hunting. You will quickly and easily open up a frozen pond and now you will have the only open water around. The Ice Eater will also keep the water and decoys moving to make the water look even more attractive.

• Heavy grade Quick Disconnect Power Cords: Ice Eater power cords are oil and water-resistant and excel at preventing voltage loss.

• Industry Best 3-Year Warranty.  You can rest assured that you are getting a quality product with a PowerHouse Ice Eater. Unmatched Performance, Unmatched Durability, Unmatched Warranty.

• Made in the USA 🇺🇸: Proudly manufactured right here in the United States. Top-Notch American Quality from Top-Notch American People.

Bearon Aquatics Powerhouse Ice Eater P250 Dock DeIcer Specifications: